Gecko Special Coatings - Safety Flooring, Non-Slip Floors and Slip-Resistant Floors

High Build Roll on Coatings

Epoxyflex® Potable Water Certified 353

Description: GECKO Epoxyflex® Potable Water Certified 353 is a 100% solid 2-pack system designed to give maximum protection for industrial assets from chemical attack, moisture and other source of corrosion. Approved for Potable Water (AS 4020:2005). It is a high build system normally applied by brush or roller at 250-500 microns DFT (dry film thickness) at one application. Verticle slump resistance at 500 µm (25°C), multiple coats are required for immersion and corrosive environments. 

Application: Drinking water process equipment lining, wastewater treatment plant equipments, chemical storage lining, primary & secondary containment, metal & concrete corrosion protection.

Pack sizes: 4L, 10L, 18L


Epoxyflex® High Build General 360

Description: GECKO Epoxyflex® High Build General 360 is a 100% solid epoxy material designed to give maximum protection for industrial assets from chemical attack, moisture and other source of corrosion. It is a high build sistem normally applied by brush, squeegee or quality roller for 250-500 microns DFT at one application. Multiple coats are required for immersion and corrosive environments. An initial coat of Epoxyflex® Primer is always recommended.

Application: Sterile room walls, floor & deck, water tank lining, water water tank lining.

Pack sizes: 2L, 4L, 10L, 18L


Epoxyflex® High Build High performance 362

Description: GECKO Epoxyflex® High Build High Performance 362 is a 100% solid epoxy material designed to give maximum protection for industrial assets from chemical attack, moisture and other source of corrosion. It is a high build system normally applied by brush, squeegee or roller at up for 250-500 microns DFT at one application. Multiple coats are required for immersion and corrosive environments. An Expoxyflex® Pimer is always recommended.

Application: Tank lining, bunding areas, pipes, pumps, floor & decking, hygiene areas, treatment plants.

Available in: 4L, 10L, 18L


Epoxyflex® High Build Rapid 364

Description: GECKO Epoxyflex High Build Rapid 364 is a 100% solid epoxy material designed to give maximum protection for industrial assets from chemical attack, moisture and other sources of corrosion. It is high build system normally applied by brush, squeegee or quality roller for 250-500 microns DFT at one application. Multiple coats are required for immersion and corrosive environments. This product is suitable for applications where time is a crucial factor or when low temperatures are involved.

Application: Tank internals, bunding areas, pipes, pumps, floor and deck, ship decks, ramps, hygiene areas, treatment plants, secondany containments.

Pack sizes: 2L, 4L, 10L, 18L


Epoxyflex® High Build High Chemical Resistant Roll On 552

Description: GECKO Epoxyflex® High Chemical Resistant High Build 552 is a 100% solid 2-pack bisphenol-F based epoxy system designed especially to protect concrete and steel against corrosive chemicals. It is high build system normally applied by brush, squeegee or quality roller at 250-500 microns DFT at one application. It is suitable for use for corrosive protection, concrete lining and secondary containment especially aacid bunds.

Application: Chemical resistant flooring, chemical containment linings, secondary containments, structural protection against corrosive environments.

Pack sizes: 4L, 10L, 18L


Epoxyflex® High Build High Chemical Resistant Roll On Rapid 554

Description: GECKO Epoxyflex® High Build High Chemical Resistant Roll On Rapid 554 is a 100% solid 2-pack bisphenol-F based epoxy system especially designed to protect concrete and steel against corrosive chemicals. It is a high build system normally applied by brush, squeegee or quality roller for 250-500 microns DFT at one application. It is suitabe for use with structural protection, concrete lining and secondary containment especially acid bunds. An initial coat of Epoxyflex® Primer is always recommended.

Application: Chemical resistant flooring, chemical containment linings, secondary containments, structural protection against corrosive environments.

Pack sizes: 2L, 4L, 10L, 18L  


Gecko Special Coatings Pty Ltd

Head Office and R&D
1/1 Park Place, Bibra Lake
Western Australia
Australia, 6162
Telp : +61 8 9418 5955
Fax  : +61 8 9494 1164


© Copyright 2013 Gecko Specko. All rights reserved.
Toby Creative